LAZERMaster™ Laser Splicing System LZM-120A+

Features

  • Fiber Ablation that can be used for cleaving, shaping, or custom mode stripping
    •Splicing and glass processing of 80 μm to 2.3 mm fibers
    •High resolution motion for precise control during splicing and glass processing operations
    •Automatic beam alignment and ablation focusing through new active mirror and focus motors.
    •Extensive library of applications which are similar between the LZM and FSM family
    •FPS PC GUI provides additional measurement capabilities and glass shaping control
    •No need for process gas (as required with filament systems) or Vacuum systems
    •Class 1 Laser with redundant automated laser safety features

LAZERMaster™ Laser Splicing System LZM-110M/110P

Features

  • Capable of splicing fibers up to 2.3mm in Diameter
  • Maximum Taper Length-10mm
  • Very clean heat source: Absolutely no deposits on fiber surface as might occur with filaments or electrodes.No maintenance need
  • Substantially reduces maintenance and calibration requirements
  • No need for process gas (as required with filament systems) or Vacuum systems
  • Class 1 Laser with redundant automated laser safety features

LAZERMaster™ Laser Splicing System LZM-110M+/110P+

Features

  • Capable of splicing fibers up to 2.3mm in Diameter
  • Maximum Taper Length-36mm
  • Very clean heat source: Absolutely no deposits on fiber surface as might occur with filaments or electrodes.No maintenance need
  • Substantially reduces maintenance and calibration requirements
  • No need for process gas (as required with filament systems) or Vacuum systems
  • Class 1 Laser with redundant automated laser safety features

LAZERMaster™ Laser Splicing System LZM-100M/P

Features

  • Capable of splicing fibers up to 2.3mm in Diameter
  • Maximum Taper Length-130mm
  • Very clean heat source: Absolutely no deposits on fiber surface as might occur with filaments or electrodes.No maintenance need
  • Substantially reduces maintenance and calibration requirements
  • No need for process gas (as required with filament systems) or Vacuum systems
  • Class 1 Laser with redundant automated laser safety features

Specialty Fiber Fusion Splicers FSM-100M/P

Features

  • Advanced plasma zone control methods
  • LDF (Large Diameter Fiber) splicing capability
  • Enhanced arc calibration methods
  • Dual splice loss estimation
  • Enhanced Sweep arc
  • Fiber profile learning function
  • Enhanced ability for fiber shaping, glass processing, tapering
  • Advanced PM fiber alignment methods

Specialty Fiber Fusion Splicers FSM-100M+/P+

Features

  • Advanced plasma zone control methods
  • LDF (Large Diameter Fiber) splicing capability
  • Enhanced arc calibration methods
  • Dual splice loss estimation
  • Enhanced Sweep arc
  • Fiber profile learning function
  • Enhanced ability for fiber shaping, glass processing, tapering
  • Advanced PM fiber alignment methods

Single Fiber Fusion Splicer 70S+

Features

  • Splicing 6sec. (ULTRA FAST)
  • Tube heating time 9sec. (Slim60mm)
  • Multi-function transit case with integrated workstation
  • Slide in AC adaptor
  • Absolute robustness
  • Bluetooth capability connection